Acrylic Pouring Medium - Pebeo Sudio- 250ml
Water-based medium for making acrylic colours fluid for casting and pouring techniques. As it can be diluted it goes further than other brands.
Large squeezable bottle with resealable lid.
Glossy, non-yellowing, transparent, flexible film, permanent once dry.
Can also be used on its own as a brush on Gloss Varnish.
Also Available in 500ml.
Recommended proportions: use 1 part medium to 1 part Acrylic colour to 1 part water (experiment for different effects).
If diluting with water mix the colour first, once fully mixed then add the Pouring medium, mixing slowly to avoid bubbles.
It is recommended to leave the colour / medium mixture for about 1 hour before pouring, in order to ensure consistency.
A few drops of silicone oil can be used to stimulate cell creation.
Drying: Away from dust, dry to the touch in 30 minutes to 1 hour and completely dry in 1-8 days depending on the thickness.
Cleans up with water.
In addition, to compliment the Pouring Resin we have an introductory set of Tubes of Pebeo Iridescent and Titanium White Studio Acrylics to create beautiful mixtures on special offer.
Pour and overlay colours in concentric circles to the edges.
The medium provides a smooth, clean and uniform application.
By using the same technique but rotating the surface as you pour new unique shapes can be created.
Pour random colours separately, a spatula/palette knife can be used to layer the colours.
When Titanium White is used, cells can sometimes randomly appear without the need to add silicone oil.
A cup pour means putting your chosen colours into a container before applying to your substrate.
Adding Silicone Oil
A few drops of Silicone Oil into the /colour mixture (3 to 8 drops maximum depending on the amount prepared) will aid with the creation of cells. Adjust according to the desired effect (Warning: if there is too much silicone oil, it may create holes in some places).