During application, protect the object and the surrounding area from spray. Surfaces should be dry, clean of dust, oils and rust before applying the varnish.
Always test spray on a non-visible area to check compatibility of lacquer or paint.
Shake can well for 2-3 minutes upside down to take advantage of gravity.
Remove the safety ring by removing the nozzle and turning the can upside down allowing it to fall out.
Then re-apply the nozzle.
Apply varnish in several thin layers, spraying before the previous coat is fully dry, but with 2 minutes between each pass.
Further coats might require a drying time of 24 hours or more depending on substrate.
For optimal lifespan, always store cans with the nozzle on.
NOT COMPATIBLE WITH SYNTHETIC BASE LACQUERS.
PLEASE NOTE - THERE IS A PLASTIC RING TO REMOVE UNDER THE NOZZLE BEFORE USE
